home *** CD-ROM | disk | FTP | other *** search
- Path: alf.zfn.uni-bremen.de!just
- From: just@alf.zfn.uni-bremen.de (Christian-Eberhard Just)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: A3000 3.1 rom upgrade...
- Date: 10 Feb 1996 22:53:46 GMT
- Organization: Zentrum fuer Netze, Universitaet Bremen
- Message-ID: <4fj7lq$ho8@gina.zfn.uni-bremen.de>
- References: <4fh0t2$8kl@news.service.uci.edu>
- NNTP-Posting-Host: alf.zfn.uni-bremen.de
- X-Newsreader: TIN [version 1.2 PL2]
-
- Kilroy (eabu2072@aldebaran.oac.uci.edu) wrote:
- : I am kinda stuck here...i just recently got 3.1 roms for my a3000, and
- : would like to install them...
-
- : the news roms are labeled 0 and 1...there spaces on the a3000 motherboard
- : that are labeled for rom 0 and rom 1...so...call me a worry wart...but
- : should the roms go there???
-
- : or should i take out the old roms, and put them in their spots???
-
- Take the old roms out (in mine, a 16 Mhz 3000, they were in a tower that
- sat upside down on the board and needed to be tied onto that with a plastic
- string (did not look very professional, so I cut off the string
-
- but without the string the "tower" would be much too loose). On newer
- models, there is no "tower" anymore. So just identify the old roms,
- remember their orientation/place and plug the new ones in. Sometimes
- you have to swith the roms (1 vs. 0), you should see from the
- markings on the old roms.
-
- Greetings,
-
- Christian Just
-
- just@alf.zfn.uni-bremen.de
-
- g
-
- : thanks
-
- : Alfredo
-
- : --
- : Alfredo Cartagena Kilroy
- : Liquid Shadow Factory Delta Sigma Phi
- : (714) 448-9682 Irvine Colony, '91
-
-